[bassVI]

Hello All,
I know this one may have been done to death but,
I'm building a Ripper/G3 clone, it will have a set neck traditional Ripper headstock and three-point bridge; the pickups and basic body layout will be as a G3.
I'd like to wire it with a six way switch to get all possible combinations:
1. Neck pickup
2. Neck & Middle
3. Middle
4. Middle & Neck
5. Neck
6. All
OK, I know there is one more combination, Neck and Bridge, I think that may have to be done with a push/ pull on the volume pot or something. Anyway are there any wiring gurus here who could draw up a schematic for such a thing? Even advice as to a book or link would be most helpful.
Thanks,
Scott
BTW I think this might be my first post!